60609
✓ Verified by PartsTable
ICY BOX · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW
<b>Eight times a week!</b><br>Up to 8x 2.5" SATA/ SAS drives can be installed in this case. The backplane is HotSwap capable, so that the HDDs can be easily exchanged without having to remove the enclosure.<br><br><b>Better safe than sorry</b><br>The enclosure is made entirely of metal and the trays are provided with a lock that prevents accidental opening and unauthorized access. An LED also indicates operation and disk access for each storage medium.<br><br><b>When it’s hot</b><br>The aluminum dissipates heat very well and the cooling of the drives during heavy operation is ensured by two 50 mm fans on the back.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-119-3957, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO →
MRO_GENERAL →
60609
NSN: 5306-00-119-3957 FSC: 5306 CAGE: 0HMS1 — WOODWARD HRT DIV WOODWARD HRT/CADILLAC GAGE (USA)
SPECIFICATIONS
material STEEL OVERALL body_style CYLINDRICAL SERVO MOUNTED case_style SQUARE seal_width 0.500 INCHES NOMINAL IN body_length 1.500 INCHES NOMINAL IN shaft_style ROUND bearing_type BALL SHAFT pilot_length 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM IN shaft_length 0.672 INCHES NOMINAL IN shaft_runout 0.001 INCHES IN shank_length 1.063 INCHES NOMINAL IN thread_class 3A A NSN 5306-00-119-3957
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED
Hex HEAD
LENGTH: —
THREAD: — × —
MATERIAL: —
PN: 60609 · ICY BOX
⚠ VERIFY BEFORE ORDERING
Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part.
Grade/class stamped on bolt head determines tensile strength
✓ BROKER TIP
Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2.
Always confirm head marking matches specification requirement
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• THREAD QUANTITY PER INCH: 32
• THREAD LENGTH: 0.875 INCHES MINIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-11415,CLASS E MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
• SURFACE TREATMENT: CADMIUM OVERALL
• EYE STOCK DIAMETER: 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
• THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH 32 THREAD LENGTH 0.875 INCHES MINIMUM IN THREAD CLASS 3A A MATERIAL STEEL OVERALL MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-11415,CLASS E MIL SPEC SINGLE MATERIAL RESPONSE OVERALL SURFACE TREATMENT CADMIUM OVERALL EYE STOCK DIAMETER 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN THREAD DIRECTION RIGHT-HAND DISTANCE FROM CENTER OF EYE TO SHANK END 3.250 INCHES NOMINAL IN SHANK LENGTH 1.063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
60609 Interchangeable interchangeable cross-reference
interchangeable
060609 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable interchangeable cross-reference
interchangeable
7648736P005 Interchangeable interchangeable cross-reference
interchangeable
7648736PT5 Interchangeable interchangeable cross-reference
interchangeable
749-6175 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 60609?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60609?
60609 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by ICY BOX. It is classified as a MRO (MRO_GENERAL).
What parts can replace 60609?
There are 9 known substitutes for 60609: 60609, 060609, 00044 and 6 more. Substitute compatibility should be verified for your specific system.
Is 60609 still available?
60609 is currently cancelled.