PartsTable
Technical Data Sheet
Download PDF

6056B — 6056B

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

6056B: 6056B.

The 6056B is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, body_style: BOARD MOUNTED, overall_width: 0.873 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 0.873 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN, surface_treatment: CHROMATE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-981-8914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6056B
NSN: 5330-00-981-8914
NIINs: 009818914, 013343593
FSC: 5330 — Packing and Gasket Materials
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
body_styleBOARD MOUNTED
overall_width0.873 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN
overall_height0.750 INCHES NOMINAL IN
overall_length0.873 INCHES MINIMUM AND 0.907 INCHES MAXIMUM IN
surface_treatmentCHROMATE
unthreaded_mounting_hole_diameter0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
accommodated_device_mounting_hole_quantity4
surface_treatment_document_and_classificationMIL-C-5541,TYPE II MIL SPEC SINGLE TREATMENT RESPONSE
accommodated_device_mounting_hole_pattern_styleFOUR HOLE - 0.958 - 0.190
NSN5330-00-981-8914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6056B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.281 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.031 INCHES NOMINAL IN
•
MATERIAL: COPPER OVERALL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.281 INCHES NOMINAL IN
APERTURE DIAMETER1.031 INCHES NOMINAL IN
MATERIALCOPPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
SMS-6056BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
200110AUPC173Reference document
Same NSN cross-reference
Reference document — Secondary reference
AB6056BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6056B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6056B?
6056B is a 6056B. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6056B?
There are 3 known substitutes for 6056B: SMS-6056B, 200110AUPC173, AB6056B. Substitute compatibility should be verified for your specific system.
What is the NSN for 6056B?
6056B is cataloged in the U.S. Government catalog under NSN 5330-00-981-8914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6056B