PartsTable
Technical Data Sheet
60542 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This double gang face plate is designed to be used with the Lindy Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio and video signals over low cost Cat5e/6 cable. Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations. Up to 4 modules can be installed in this face plate.

If installing less than 4 modules, blanking plates can be used for a tidier installation. Also available are a range of accessories including face plates, back boxes and bulk cable for a total extender solution.<br><br> Dimensions: 86 x 146mm Colour: White This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8382, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
60542
NSN: 5330-00-285-8382
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
diameter1.25 INCHES NOMINAL IN
basic_shape_styleROUND
end_item_identification2320-01-653-6557
part_name_assigned_by_controlling_agencyADHESIVE BACKED MASKING STICKER
NSN5330-00-285-8382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60542 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLE: ANGULAR
MATERIAL: STEEL CASE
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
A-A-51152Interchangeable
interchangeable cross-reference
interchangeable
33.450 ROUGH (SPECIAL)Interchangeable
interchangeable cross-reference
interchangeable
112270RInterchangeable
interchangeable cross-reference
interchangeable
50109Interchangeable
interchangeable cross-reference
interchangeable
35Interchangeable
Pago tarjeta de credito
interchangeable
43166Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60542?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60542?
60542 is a BIT,SCREWDRIVER manufactured by Lindy.
What parts can replace 60542?
There are 21 known substitutes for 60542: A-A-51152, 33.450 ROUGH (SPECIAL), 112270R and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60542?
60542 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60542