PartsTable
Technical Data Sheet
Download PDF

60511762-1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

60511762-1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: TITANIUM, overall_width: 0.570 INCHES NOMINAL IN, overall_height: 0.570 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN, mounting_hole_type: COUNTERBORED, mounting_hole_diameter: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-383-8777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60511762-1
NSN: 5340-01-383-8777
FSC: 5340 — Hardware, Commercial
CAGE: 1Y686 — TBM PRINCETON PRECISION GROUP LLC (USA)
SPECIFICATIONS
materialTITANIUM
overall_width0.570 INCHES NOMINAL IN
overall_height0.570 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
mounting_hole_typeCOUNTERBORED
mounting_hole_diameter0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
mounting_hole_quantity1
material_document_and_classificationMIL-T-9046 COMP CP-3 COND A MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-383-8777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60511762-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-T-9046 COMP CP-3 COND A MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
MATERIAL: TITANIUM
•
MOUNTING HOLE TYPE: COUNTERBORED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT0.570 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-9046 COMP CP-3 COND A MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
OVERALL LENGTH0.750 INCHES NOMINAL IN
OVERALL WIDTH0.570 INCHES NOMINAL IN
MATERIALTITANIUM
MOUNTING HOLE TYPECOUNTERBORED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 60511762-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60511762-1?
60511762-1 is a BRACKET,MOUNTING.
What is the NSN for 60511762-1?
60511762-1 is cataloged in the U.S. Government catalog under NSN 5340-01-383-8777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60511762-1