PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60453-3
60453-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,FLOW is a the manufacturer industrial component. Key specifications include temp_rating: -65.0 FAHRENHEIT AND 125.0 FAHRENHEIT DEGF, terminal_type: WIRE LEAD, overall_length: 5.000 INCHES NOMINAL IN, mounting_method: INLET CONNECTION AND OUTLET CONNECTION, overall_diameter: 1.781 INCHES NOMINAL IN, special_features: ELECTRICAL RATING OF MAGNETIC SWITCH: 0.5 AMPS RESISTIVE OR INDUCTIVE (L/R. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-758-0538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60453-3
NSN: 5330-00-758-0538
FSC: 5330
CAGE: 05463 — WHEELABRATOR-FRYE INC BALCRANK PRODUCTS (USA)
SPECIFICATIONS
temp_rating-65.0 FAHRENHEIT AND 125.0 FAHRENHEIT DEGF
terminal_typeWIRE LEAD
overall_length5.000 INCHES NOMINAL IN
mounting_methodINLET CONNECTION AND OUTLET CONNECTION
overall_diameter1.781 INCHES NOMINAL IN
special_featuresELECTRICAL RATING OF MAGNETIC SWITCH: 0.5 AMPS RESISTIVE OR INDUCTIVE (L/R
style_designatorCYLINDRICAL
center_hole_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
contact_adjustabilityACTUATION POINT NOT ADJUSTABLE
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
contact_action_stimulusDECREASE
contact_stimulus_rating2.80 ACTUATION POINT NOMINAL GALLONS PER MINUTE
NSN5330-00-758-0538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60453-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 125.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 125.0 FAHRENHEIT DEGF
CROSS-SECTIONAL SHAPE STYLEO-RING
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FS-200-UE-JB-1.00-V-2.80-C-SInterchangeable
interchangeable cross-reference
interchangeable
604533Interchangeable
interchangeable cross-reference
interchangeable
BBF36PL3TEB2-015ITEMITEM011Interchangeable
interchangeable cross-reference
interchangeable
BBF36PL3TEB2-015Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60453-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60453-3?
60453-3 is a SWITCH,FLOW.
What parts can replace 60453-3?
There are 4 known substitutes for 60453-3: FS-200-UE-JB-1.00-V-2.80-C-S, 604533, BBF36PL3TEB2-015ITEMITEM011 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60453-3?
60453-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-758-0538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60453-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026