PartsTable / COMPONENT / 60446L
60446L
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 1.828 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-4030, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
60446L
NSN: 5330-00-154-4030 FSC: 5330 CAGE: 81118 — EATON CORPORATION (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.375 INCHES NOMINAL IN housing_bore_diameter 1.828 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.375 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-154-4030
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 60446L
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEAL WIDTH: 0.375 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR CASE STYLE SQUARE HOUSING BORE DIAMETER 1.828 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEAL WIDTH 0.375 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 1.375 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
60446 Interchangeable interchangeable cross-reference
interchangeable
AX93 Interchangeable interchangeable cross-reference
interchangeable
PGF10248-2 Interchangeable interchangeable cross-reference
interchangeable
PA6319 Interchangeable interchangeable cross-reference
interchangeable
QQ-A-200/11 Interchangeable interchangeable cross-reference
interchangeable
82593 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 60446L?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60446L?
60446L is a SEAL,PLAIN ENCASED.
What parts can replace 60446L?
There are 7 known substitutes for 60446L: 60446, AX93, PGF10248-2 and 4 more. Substitute compatibility should be verified for your specific system.
Is 60446L still available?
60446L is currently cancelled.