60403: AMP OSC GRP.
Future-proof expansion With the PCI expansion card you can easily upgrade older systems to the new level. You can experience all the advantages of a fast M.2 SSD without having to rebuild the whole system again. Customizable The IB-PCI214M2-HSL contains both a full and a half profile cover.
This means that it can be used in almost any type of housing without any problems. In addition, M.2 SSDs with the dimensions of 22x30/42/60/80 mm can be installed. No matter what configuration you need, the IB-PCI214M2-HSL gives full throttle in any setting.
Speed until the board glows The current M.2 NVMe SSDs achieve more than five times the speed of traditional SATA SSDs. This enormous power naturally generates a lot of waste heat on the small M.2 cards. In order to protect the card and the system, the speed is throttled if the SSD heats up too much.
The IB-PCI214M2-HSL offers enough cooling power with the enclosed heat conduction pads and the large hea This part is cataloged in the U.S. Government catalog under NSN 2810-00-293-3770, indicating validated use in U.S. government and defense logistics supply chains.
| material | RUBBER POLYCHLOROPRENE GROMMET |
| body_style | CHAMFERED ENDS |
| bore_style | INSIDE CHAMFER AND COUNTERBORED |
| body_length | 4.4350 INCHES MINIMUM AND 4.4400 INCHES MAXIMUM IN |
| bore_diameter | 0.8300 INCHES MINIMUM AND 0.8430 INCHES MAXIMUM IN |
| outside_diameter | 1.12430 INCHES MINIMUM AND 1.12460 INCHES MAXIMUM IN |
| counterbore_depth | 0.750 INCHES NOMINAL IN |
| counterbore_diameter | 0.842 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN |
| casehardening_indicator | CASEHARDENED |
| end_item_identification | NOZZLE VALVE |
| countersink_angle_in_deg | 45.0 |
| end_chamfer_angle_in_deg | 45.0 |
| NSN | 2810-00-293-3770 |
| COUNTERSINK ANGLE IN DEG | 45.0 |
| BODY STYLE | CHAMFERED ENDS |
| BORE STYLE | INSIDE CHAMFER AND COUNTERBORED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6274 ASSN STD SINGLE MATERIAL RESPONSE |
| OUTSIDE DIAMETER | 1.12430 INCHES MINIMUM AND 1.12460 INCHES MAXIMUM IN |
| COUNTERBORE DEPTH | 0.750 INCHES NOMINAL IN |
| END CHAMFER ANGLE IN DEG | 45.0 |
| COUNTERBORE DIAMETER | 0.842 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN |
| BODY LENGTH | 4.4350 INCHES MINIMUM AND 4.4400 INCHES MAXIMUM IN |
| CASEHARDENING INDICATOR | CASEHARDENED |
No substitute or cross-reference records for this part.