PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 603599
603599 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

DAMPER MOUNTING FRAME PURGE EXHA. Key specifications include length: 20.000 FEET NOMINAL FT, material: ALUMINUM ALLOY 6061, overall_width: 0.750 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED, overall_height: 0.750 INCHES NOMINAL IN, first_tip_style: SQUARE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-038-9308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
603599
NSN: 5330-00-038-9308
FSC: 5330
CAGE: 87405 — FACET (OKLAHOMA) LLC (USA)
SPECIFICATIONS
length20.000 FEET NOMINAL FT
materialALUMINUM ALLOY 6061
overall_width0.750 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
overall_height0.750 INCHES NOMINAL IN
first_tip_styleSQUARE END
basic_shape_styleANGLE
left_inside_angle90.0 DEGREES NOMINAL
fabrication_methodEXTRUDED
base_flange_thickness0.125 INCHES NOMINAL IN
weight_per_unit_measure0.210 POUNDS PER LINEAR FOOT LBS
left_side_flange_thickness0.125 INCHES NOMINAL IN
NSN5330-00-038-9308
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 603599 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
60-3599Interchangeable
interchangeable cross-reference
interchangeable
ASTM B308Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 603599?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 603599?
603599 is a DAMPER MOUNTING FRAME PURGE EXHA.
What parts can replace 603599?
There are 3 known substitutes for 603599: 60-3599, ASTM B308, QQ-A-200/16. Substitute compatibility should be verified for your specific system.
What is the NSN for 603599?
603599 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-038-9308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 603599

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026