PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60342P940
60342P940 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, overall_outside_diameter: 0.6880 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60342P940
NSN: 3110-00-108-7953
FSC: 3110
CAGE: 65177 — PATTERSON PUMP CO DIV PATTERSON PUMP COMPANY (USA)
SPECIFICATIONS
bore_diameter0.5000 INCHES NOMINAL IN
alignment_typeRIGID
overall_outside_diameter0.6880 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-108-7953
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 60342P940 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.6880 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER0.6880 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
22084Interchangeable
interchangeable cross-reference
interchangeable
7406262Interchangeable
interchangeable cross-reference
interchangeable
22279Interchangeable
interchangeable cross-reference
interchangeable
709481Interchangeable
interchangeable cross-reference
interchangeable
M8121X0HInterchangeable
interchangeable cross-reference
interchangeable
353-045-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60342P940?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60342P940?
60342P940 is a BEARING,ROLLER,NEEDLE.
What parts can replace 60342P940?
There are 11 known substitutes for 60342P940: 22084, 7406262, 22279 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60342P940?
60342P940 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60342P940

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026