PartsTable
Technical Data Sheet
6025-5 ✓ Verified by PartsTable
ICY BOX · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>No more slots?</b><br>If you want to use your existing USB 3.0 devices on the latest mobile devices and laptops with a USB port this compact hub is a quick help. It uses a single USB 3.0 port on its own and creates four additional Type-A ports. Problem solved!<br><br><b>Well-known and still new</b><br>Like all our hubs the IB-HUB1409-U3 has the Plug & Play and HotSwap ability.

These enable the driver-free installation of the device and the rapid replacement of the devices during operation. USB 3.0 has a transfer rate of up 5 Gbit/s.<br><br><b>Simple and chic</b><br>The IB-HUB1409-U3 is made from aluminum and thus very light even if you are on the move. The look, however, does not lose in importance, the hub presents itself with a sandblasted surface.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-823-4883, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
6025-5
NSN: 5331-00-823-4883
FSC: 5331 — O-RING
CAGE: 24975 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
head_styleHEXAGON
thread_directionRIGHT-HAND
width_between_flats12.7 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM MM
end_item_identification6115-01-531-0571, 20KW GENERATOR SET
part_name_assigned_by_controlling_agencyMETRIC MACHINE SCREW (M8)
NSN5331-00-823-4883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6025-5 MFR: ICY BOX ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 1.854 INCHES MINIMUM AND 1.874 INCHES MAXIMUM IN
MATERIAL: RUBBER SILICONE CLASS Q
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.854 INCHES MINIMUM AND 1.874 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
M7733GInterchangeable
interchangeable cross-reference
interchangeable
M464Interchangeable
interchangeable cross-reference
interchangeable
7733GInterchangeable
interchangeable cross-reference
interchangeable
8148650Interchangeable
interchangeable cross-reference
interchangeable
20C-0004-10Interchangeable
interchangeable cross-reference
interchangeable
6025-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6025-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6025-5?
6025-5 is a CAPACITOR,ELECTRICAL manufactured by ICY BOX.
What parts can replace 6025-5?
There are 8 known substitutes for 6025-5: M7733G, M464, 7733G and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6025-5?
6025-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-823-4883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6025-5