PartsTable
Technical Data Sheet
Download PDF

6020-14C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6020-14C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.995 INCHES MINIMUM IN, length: 1.045 INCHES MINIMUM IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.128 INCHES NOMINAL IN, overall_height: 1.010 INCHES MINIMUM IN, surface_treatment: SILVER OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-336-5033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6020-14C
NSN: 5340-01-336-5033
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.995 INCHES MINIMUM IN
length1.045 INCHES MINIMUM IN
materialCOPPER ALLOY OVERALL
hole_diameter0.128 INCHES NOMINAL IN
overall_height1.010 INCHES MINIMUM IN
surface_treatmentSILVER OVERALL
material_thickness0.019 INCHES MINIMUM IN
loop/holding_dimension0.995 INCHES MINIMUM IN
distance_from_loop_center_to_end0.625 INCHES NOMINAL IN
NSN5340-01-336-5033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6020-14C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.045 INCHES MINIMUM IN
•
LOOP/HOLDING DIMENSION: 0.995 INCHES MINIMUM IN
•
MATERIAL THICKNESS: 0.019 INCHES MINIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER OVERALL
•
WIDTH: 0.995 INCHES MINIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.010 INCHES MINIMUM IN
LENGTH1.045 INCHES MINIMUM IN
LOOP/HOLDING DIMENSION0.995 INCHES MINIMUM IN
MATERIAL THICKNESS0.019 INCHES MINIMUM IN
DISTANCE FROM LOOP CENTER TO END0.625 INCHES NOMINAL IN
SURFACE TREATMENTSILVER OVERALL
WIDTH0.995 INCHES MINIMUM IN
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.128 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6020-14C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6020-14C?
6020-14C is a CLIP,SPRING TENSION.
What is the NSN for 6020-14C?
6020-14C is cataloged in the U.S. Government catalog under NSN 5340-01-336-5033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6020-14C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.