PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601X-010053
601X-010053 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER OVERALL, peripheral_diameter: 4.125 INCHES NOMINAL IN, center_hole_diameter: 3.125 INCHES NOMINAL IN, cross-sectional_height: 0.531 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-4176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601X-010053
NSN: 5330-00-133-4176
FSC: 5330
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER OVERALL
peripheral_diameter4.125 INCHES NOMINAL IN
center_hole_diameter3.125 INCHES NOMINAL IN
cross-sectional_height0.531 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-133-4176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 601X-010053 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COLOR: BLACK
•
CROSS-SECTIONAL HEIGHT: 0.531 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.125 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 4.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
COLORBLACK
CROSS-SECTIONAL HEIGHT0.531 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.125 INCHES NOMINAL IN
PERIPHERAL DIAMETER4.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
MATERIALRUBBER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
000-048Interchangeable
interchangeable cross-reference
interchangeable
450.862Interchangeable
interchangeable cross-reference
interchangeable
182MLL1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601X-010053?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601X-010053?
601X-010053 is a PACKING,PREFORMED.
What parts can replace 601X-010053?
There are 3 known substitutes for 601X-010053: 000-048, 450.862, 182MLL1. Substitute compatibility should be verified for your specific system.
What is the NSN for 601X-010053?
601X-010053 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-4176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601X-010053

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026