PartsTable
Technical Data Sheet
Download PDF

6019-25A — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6019-25A: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, length: 0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.070 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, overall_height: 1.083 INCHES MINIMUM AND 1.103 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-268-2753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6019-25A
NSN: 5340-01-268-2753
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
length0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
materialSTEEL OVERALL
hole_diameter0.070 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
overall_height1.083 INCHES MINIMUM AND 1.103 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
loop/holding_dimension0.870 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.566 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
material_document_and_classificationASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-268-2753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6019-25A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.870 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.566 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.083 INCHES MINIMUM AND 1.103 INCHES MAXIMUM IN
LENGTH0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.870 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
MATERIAL THICKNESS0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.566 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6019-25A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6019-25A?
6019-25A is a CLIP,SPRING TENSION.
What is the NSN for 6019-25A?
6019-25A is cataloged in the U.S. Government catalog under NSN 5340-01-268-2753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6019-25A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.