PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601761
601761 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,JOURNAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-2339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601761
NSN: 3110-00-117-2339
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width10.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter32.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-117-2339
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 601761 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCES FOR JOURNAL BEARINGS
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SOLID INNER AND OUTER RACES
•
OVERALL OUTSIDE DIAMETER: 80.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER40.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
MATERIALSTEEL OVERALL
STYLE DESIGNATORSOLID INNER AND OUTER RACES
SPECIAL FEATURESOIL HOLE IN OUTER RING
OVERALL OUTSIDE DIAMETER80.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH1.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
M24136/2-08Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-24136/2Interchangeable
interchangeable cross-reference
interchangeable
0678-002 PC29,3Interchangeable
interchangeable cross-reference
interchangeable
956857Interchangeable
interchangeable cross-reference
interchangeable
W368Interchangeable
interchangeable cross-reference
interchangeable
3201XR1AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601761?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601761?
601761 is a BEARING,ROLLER,JOURNAL.
What parts can replace 601761?
There are 13 known substitutes for 601761: M24136/2-08, MIL-DTL-24136/2, 0678-002 PC29,3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601761?
601761 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-2339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601761

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026