The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, length: 0.690 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.140 INCHES NOMINAL IN, overall_height: 0.790 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-045-7116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
distance_from_loop_center_to_end
0.397 INCHES MINIMUM IN
material_document_and_classification
QQ-C-533,ALLOY 170,TEMPER A FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 172,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-01-045-7116
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.690 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 170,TEMPER A FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 172,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.595 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
DISTANCE FROM LOOP CENTER TO END: 0.397 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.790 INCHES MAXIMUM IN
LENGTH
0.690 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,ALLOY 170,TEMPER A FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 172,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.595 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.025 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM LOOP CENTER TO END
0.397 INCHES MINIMUM IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
WIDTH
0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6016-43CC?
6016-43CC is a CLIP,SPRING TENSION.
What parts can replace 6016-43CC?
There is 1 known substitute for 6016-43CC: NAS1464. Substitute compatibility should be verified for your specific system.
What is the NSN for 6016-43CC?
6016-43CC is cataloged in the U.S. Government catalog under NSN 5340-01-045-7116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.