PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60156-1
60156-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include diameter: 1.750 INCHES NOMINAL IN, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, unit_type: PORTABLE, body_width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, body_length: 0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-164-3058, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60156-1
NSN: 5340-00-164-3058
FSC: 5340
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
diameter1.750 INCHES NOMINAL IN
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
unit_typePORTABLE
body_width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
body_length0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
inside_diameter0.500 INCHES NOMINAL IN
features_providedMONOLITHIC AND POSITIVE OUTPUTS AND LOW POWER AND W/CLEAR
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialPLASTIC
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
center_hole_diameter80.0 MILLIMETERS NOMINAL MM
NSN5340-00-164-3058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60156-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER OVERALL
INSIDE DIAMETER0.500 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL THICKNESS: 0.250 IN. NOMINAL IN
DIAMETER1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
CL944Upgraded Successor
successor cross-reference
successor
045200Interchangeable
Fargo YMCKO Full Color Ribbon for DTC4500 Series
interchangeable
32-4304Interchangeable
interchangeable cross-reference
interchangeable
SN74L73NInterchangeable
interchangeable cross-reference
interchangeable
100066Interchangeable
interchangeable cross-reference
interchangeable
458-2047Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60156-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60156-1?
60156-1 is a MICROCIRCUIT,DIGITAL.
What parts can replace 60156-1?
There are 14 known substitutes for 60156-1: CL944, 045200, 32-4304 and 11 more. Substitute compatibility should be verified for your specific system.
Is 60156-1 still available?
60156-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60156-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026