PartsTable
Technical Data Sheet
PartsTable / MRO / 6014C
6014C ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

SWITCH,MOTOR FOR DENTAL MIXING D. Key specifications include material: STEEL OVERALL, overall_length: 27.125 INCHES NOMINAL IN, drive_end_shape: SQUARE SINGLE END EXTERNAL, torque_capacity: 50.0 FOOT-POUNDS MINIMUM AND 250.0 FOOT-POUNDS MAXIMUM FT, special_features: RATCHET HEAD; ROUND KNURLED HANDLE, style_designator: MICROMETER END DRIVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-401-2106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6014C
NSN: 6145-00-401-2106
FSC: 6145
CAGE: 92194 — BELDEN, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length27.125 INCHES NOMINAL IN
drive_end_shapeSQUARE SINGLE END EXTERNAL
torque_capacity50.0 FOOT-POUNDS MINIMUM AND 250.0 FOOT-POUNDS MAXIMUM FT
special_featuresRATCHET HEAD; ROUND KNURLED HANDLE
style_designatorMICROMETER END DRIVE
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.500 INCHES NOMINAL SINGLE END IN
torque_signal_methodAUDIBLE
end_item_identificationFOR DENTAL MIXING DEVICE
torque_scale_graduation1.00 FOOT-POUNDS FT
nondefinitive_spec/std_data1 TYPE AND 2 CLASS
NSN6145-00-401-2106
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 6014C · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRAND QUANTITY PER CONDUCTOR: 7 ALL CONDUCTORS
•
CONDUCTOR FORM: STRANDED ALL CONDUCTORS
•
SURFACE TREATMENT: TIN CORE CONDUCTOR ALL CONDUCTORS
•
CONDUCTOR GROUPING ARRANGEMENT TYPE AND QUANTITY: 9 TWISTED PAIR ALL GROUPS
•
MATERIAL: PLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS
•
CONDUCTOR ARRANGEMENT AND QUANTITY: 9 TWISTED PAIR
•
STRAND AWG SIZE PER CONDUCTOR: 30 ALL CONDUCTORS
TECHNICAL CHARACTERISTICS (FLIS)
STRAND QUANTITY PER CONDUCTOR7 ALL CONDUCTORS
CONDUCTOR FORMSTRANDED ALL CONDUCTORS
SURFACE TREATMENTTIN CORE CONDUCTOR ALL CONDUCTORS
CONDUCTOR GROUPING ARRANGEMENT TYPE AND QUANTITY9 TWISTED PAIR ALL GROUPS
MATERIALPLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS
CONDUCTOR ARRANGEMENT AND QUANTITY9 TWISTED PAIR
SPECIAL FEATURESCONDUCTORS TWISTED INTO PRS AS PER COLOR CODING REQUIREMENTS,EA PR COVERED W/ALUMINUM FOIL SHIELD,A NO. 22 AWG TINNED COPPER DRAIN WIRE WITH EA SHIELDED PR,OUTER JACKET GRAY
STRAND AWG SIZE PER CONDUCTOR30 ALL CONDUCTORS
CROSS SECTION OUTSIDE DIAMETER0.410 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
60-1-4Upgraded Successor
successor cross-reference
successor
648-024-004Upgraded Successor
successor cross-reference
successor
586-4Upgraded Successor
successor cross-reference
successor
5834Interchangeable
interchangeable cross-reference
interchangeable
111-046-0006Interchangeable
interchangeable cross-reference
interchangeable
5591K14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6014C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6014C?
6014C is a SWITCH,MOTOR FOR DENTAL MIXING D. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6014C?
There are 16 known substitutes for 6014C: 60-1-4, 648-024-004, 586-4 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6014C?
6014C is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-401-2106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6014C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026