PartsTable
Technical Data Sheet

6013LL/B5/5S — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

6013LL/B5/5S: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_diameter: 2.5591 INCHES NOMINAL IN, overall_width: 0.7087 INCHES NOMINAL IN, special_features: OPEN TYPE, lubrication_material: GREASE, end_item_identification: HELICOPTER STABILIZED HORIZON BAR SYS. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-363-9958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6013LL/B5/5S
NSN: 3110-01-363-9958
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0LTL1 — NTN BEARING CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_diameter2.5591 INCHES NOMINAL IN
overall_width0.7087 INCHES NOMINAL IN
special_featuresOPEN TYPE
lubrication_materialGREASE
end_item_identificationHELICOPTER STABILIZED HORIZON BAR SYS
lubrication_material_document_and_classificationMIL-G-23827A MIL SPEC SINGLE MATERIAL RESPONSE A
NSN3110-01-363-9958
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6013LL/B5/5S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
BORE DIAMETER: 2.5591 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827A MIL SPEC SINGLE MATERIAL RESPONSE A
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OVERALL WIDTH0.7087 INCHES NOMINAL IN
SPECIAL FEATURESOPEN TYPE
END ITEM IDENTIFICATIONHELICOPTER STABILIZED HORIZON BAR SYS
BORE DIAMETER2.5591 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827A MIL SPEC SINGLE MATERIAL RESPONSE A
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6013LL/B5/5S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6013LL/B5/5S?
6013LL/B5/5S is a BEARING,BALL,ANNULAR.
What is the NSN for 6013LL/B5/5S?
6013LL/B5/5S is cataloged in the U.S. Government catalog under NSN 3110-01-363-9958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6013LL/B5/5S