PartsTable
Technical Data Sheet
Download PDF

601344 — BEARING,BALL,ANNULAR

✓ Government record, cited
Intellinet · TAPERED BEARING
PRODUCT OVERVIEW

601344: BEARING,BALL,ANNULAR.

19" wall mount cabinet 7U Features: - Lockable security glass door, opening angle 180º; - Depth 450 mm; - Self-supporting construction; - Powder coated in RAL 9005; - Easy wall mounting; - Top and bottom openings for cable entry; - Delivers unmounted in shipping-friendly flatpack. This part is cataloged in the U.S. Government catalog under NSN 3110-00-156-6818, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601344
NSN: 3110-00-156-6818
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 20361 — ELWELL-PARKER ELECTRIC CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width25.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter100.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6818
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 601344 · Intellinet ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 100.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH25.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 5
H20407Reference document
Same NSN cross-reference
Reference document — Secondary reference
654Reference document
Same NSN cross-reference
Reference document — Secondary reference
206773-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
7407WSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20407Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 601344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601344?
601344 is a BEARING,BALL,ANNULAR manufactured by Intellinet.
What parts can replace 601344?
There are 5 known substitutes for 601344: H20407, 654, 206773-15 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601344?
601344 is cataloged in the U.S. Government catalog under NSN 3110-00-156-6818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601344