PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6012-SS
6012-SS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, seal_width: 0.438 INCHES NOMINAL IN, construction: ONE-PIECE, special_features: MAX TEMP 250 DEG F;J M CLIPPER MOLD NO 0250-06012-SS DEGF, housing_bore_diameter: 3.063 INCHES NOMINAL IN, end_item_identification: BLOCK ASSY,SE;MARS CLASS T-AFS 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-472-6341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6012-SS
NSN: 5330-01-472-6341
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
seal_width0.438 INCHES NOMINAL IN
constructionONE-PIECE
special_featuresMAX TEMP 250 DEG F;J M CLIPPER MOLD NO 0250-06012-SS DEGF
housing_bore_diameter3.063 INCHES NOMINAL IN
end_item_identificationBLOCK ASSY,SE;MARS CLASS T-AFS 1
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-01-472-6341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6012-SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 3.063 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
CONSTRUCTION: ONE-PIECE
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER3.063 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
CONSTRUCTIONONE-PIECE
SEAL WIDTH0.438 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SPECIAL FEATURESMAX TEMP 250 DEG F;J M CLIPPER MOLD NO 0250-06012-SS DEGF
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
END ITEM IDENTIFICATIONBLOCK ASSY,SE;MARS CLASS T-AFS 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1965-1Interchangeable
interchangeable cross-reference
interchangeable
A-101-965Interchangeable
interchangeable cross-reference
interchangeable
1965Interchangeable
interchangeable cross-reference
interchangeable
NASM39087Interchangeable
interchangeable cross-reference
interchangeable
MS39087-1Interchangeable
interchangeable cross-reference
interchangeable
1965100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6012-SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6012-SS?
6012-SS is a SEAL,PLAIN.
What parts can replace 6012-SS?
There are 9 known substitutes for 6012-SS: 1965-1, A-101-965, 1965 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6012-SS?
6012-SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-472-6341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6012-SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026