PartsTable
Technical Data Sheet
PartsTable / MRO / 6012-2
6012-2 ✓ Verified by PartsTable
Ugreen · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 6012-2 is a Ugreen industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 10.2 MILLIMETERS NOMINAL MM, hardness_rating: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 18.1 MILLIMETERS NOMINAL MM, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-780-7649, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6012-2
NSN: 5999-00-780-7649
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter10.2 MILLIMETERS NOMINAL MM
hardness_rating44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter18.1 MILLIMETERS NOMINAL MM
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentZINC OVERALL
material_thickness2.2 MILLIMETERS NOMINAL MM
end_item_identification6115-01-317-2139;GENERATOR SET,DIESEL ENGINE,TRAILER
NSN5999-00-780-7649
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 6012-2 MFR Ugreen 6012-2
KEY FEATURES
•
HOLE DIAMETER: 0.120 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT SEALING GASKET
•
APERTURE DIAMETER: 1.406 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.250 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.120 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT SEALING GASKET
APERTURE DIAMETER1.406 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
OVERALL WIDTH1.625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
OVERALL LENGTH1.625 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.188 INCHES NOMINAL IN
SPECIAL FEATURESINCL GAS SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
601-2-2Interchangeable
interchangeable cross-reference
interchangeable
134-0018-001Interchangeable
interchangeable cross-reference
interchangeable
2056627Interchangeable
interchangeable cross-reference
interchangeable
667329Interchangeable
interchangeable cross-reference
interchangeable
UA7571Interchangeable
interchangeable cross-reference
interchangeable
601-GP-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 6012-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6012-2?
6012-2 is a 6012-2 manufactured by Ugreen. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6012-2?
There are 10 known substitutes for 6012-2: 601-2-2, 134-0018-001, 2056627 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6012-2?
6012-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-780-7649. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6012-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026