PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601014
601014 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SEAT,SOLENOID PIN is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.327 INCHES NOMINAL IN, overall_height: 0.077 INCHES NOMINAL IN, outside_diameter: 0.612 INCHES NOMINAL IN, material_thickness: 0.013 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1910, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601014
NSN: 5306-00-151-1910
FSC: 5306
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.327 INCHES NOMINAL IN
overall_height0.077 INCHES NOMINAL IN
outside_diameter0.612 INCHES NOMINAL IN
material_thickness0.013 INCHES NOMINAL IN
NSN5306-00-151-1910
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 601014 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.938 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 48000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 18
•
FEATURES PROVIDED: FINISHED HEAD
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
GRIP LENGTH: 0.375 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.413 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.938 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH48000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH18
FEATURES PROVIDEDFINISHED HEAD
NOMINAL THREAD DIAMETER0.625 INCHES IN
GRIP LENGTH0.375 INCHES NOMINAL IN
HEAD HEIGHT0.413 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAC CLASS
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
852563Interchangeable
interchangeable cross-reference
interchangeable
601014Interchangeable
interchangeable cross-reference
interchangeable
7702659Interchangeable
interchangeable cross-reference
interchangeable
803786-30Interchangeable
interchangeable cross-reference
interchangeable
84-000182Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601014?
601014 is a SEAT,SOLENOID PIN.
What parts can replace 601014?
There are 5 known substitutes for 601014: 852563, 601014, 7702659 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601014?
601014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1910. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026