PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601-10-5400
601-10-5400 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: -54.0 CELSIUS AND 149.0 CELSIUS SINGLE RESPONSE DEGC, inside_diameter: 0.539 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN, outside_diameter: 0.774 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN, operating_pressure: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-189-0185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601-10-5400
NSN: 4720-01-189-0185
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating-54.0 CELSIUS AND 149.0 CELSIUS SINGLE RESPONSE DEGC
inside_diameter0.539 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
outside_diameter0.774 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
measuring_method_and_length540.000 INCHES NOMINAL OVERALL IN
specification/standard_data81349-MIL-H-83797/1 GOVERNMENT SPECIFICATION
minimum_inside_bending_radius4.000 INCHES IN
NSN4720-01-189-0185
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 601-10-5400 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.539 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
TEMP RATING: -54.0 CELSIUS AND 149.0 CELSIUS SINGLE RESPONSE DEGC
•
BURST TEST PRESSURE: 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MEASURING METHOD AND LENGTH: 540.000 INCHES NOMINAL OVERALL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.539 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEROUND
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TEMP RATING-54.0 CELSIUS AND 149.0 CELSIUS SINGLE RESPONSE DEGC
BURST TEST PRESSURE5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEASURING METHOD AND LENGTH540.000 INCHES NOMINAL OVERALL IN
HYDROSTATIC TEST PRESSURE2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
MS87027-5RInterchangeable
interchangeable cross-reference
interchangeable
601-5Interchangeable
interchangeable cross-reference
interchangeable
M83797/1-5RInterchangeable
interchangeable cross-reference
interchangeable
601/AE701-16Interchangeable
interchangeable cross-reference
interchangeable
601-16Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83797Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601-10-5400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601-10-5400?
601-10-5400 is a HOSE,NONMETALLIC.
What parts can replace 601-10-5400?
There are 32 known substitutes for 601-10-5400: MS87027-5R, 601-5, M83797/1-5R and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601-10-5400?
601-10-5400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-189-0185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601-10-5400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026