PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601/AE701-8

601/AE701-8 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: PLASTIC, POLYETHYLENE (PP) TUBE, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.415 INCHES NOMINAL IN, outside_diameter: 0.672 INCHES NOMINAL IN, operating_pressure: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-580-6618, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601/AE701-8
NSN: 4720-00-580-6618
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP) TUBE
temp_rating-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.415 INCHES NOMINAL IN
outside_diameter0.672 INCHES NOMINAL IN
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius3.500 INCHES IN
layer_composition_and_location1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
outer_covering_environmental_protectionALCOHOL RESISTANT AND SOLVENT RESISTANT
NSN4720-00-580-6618
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 601/AE701-8 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.651 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 3.500 INCHES IN
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
•
VACUUM IN TORR: 76.2
•
NONDEFINITIVE SPEC/STD DATA: 8 SIZE
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.438 INCHES NOMINAL IN
OUTSIDE DIAMETER0.651 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS3.500 INCHES IN
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
VACUUM IN TORR76.2
NONDEFINITIVE SPEC/STD DATA8 SIZE
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
SPECIFICATION/STANDARD DATA81349-MIL-H-83797 GOVERNMENT SPECIFICATION
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
472Interchangeable
interchangeable cross-reference
interchangeable
BAC1503-1470Interchangeable
interchangeable cross-reference
interchangeable
60-18Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
QQA200-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601/AE701-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601/AE701-8?
601/AE701-8 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 601/AE701-8?
There are 29 known substitutes for 601/AE701-8: QQ-A-200/8, 472, BAC1503-1470 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601/AE701-8?
601/AE701-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-580-6618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601/AE701-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026