PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6009-3CN
6009-3CN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, length: 0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-932-1794, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6009-3CN
NSN: 5340-00-932-1794
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
length0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
loop/holding_dimension0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.218 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-932-1794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6009-3CN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER ALLOY 172 OVERALL
•
LENGTH: 0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.218 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY 172 OVERALL
OVERALL HEIGHT0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
LENGTH0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.218 INCHES NOMINAL IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
60-093AInterchangeable
interchangeable cross-reference
interchangeable
33-58094Interchangeable
interchangeable cross-reference
interchangeable
60-093Interchangeable
interchangeable cross-reference
interchangeable
6009-3CInterchangeable
Same NIIN cross-reference
interchangeable
GC842E48CInterchangeable
Same NIIN cross-reference
interchangeable
SMC568617Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6009-3CN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6009-3CN?
6009-3CN is a CLIP,SPRING TENSION.
What parts can replace 6009-3CN?
There are 6 known substitutes for 6009-3CN: 60-093A, 33-58094, 60-093 and 3 more. Substitute compatibility should be verified for your specific system.
Is 6009-3CN still available?
6009-3CN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6009-3CN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026