PartsTable
Technical Data Sheet
Download PDF

6009-24CC — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6009-24CC: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, length: 0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.102 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-754-2034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6009-24CC
NSN: 5340-00-754-2034
FSC: 5340 — Hardware, Commercial
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
length0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.102 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
overall_height0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
loop/holding_dimension0.315 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.231 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-754-2034
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6009-24CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.315 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.231 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
LENGTH0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.315 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
MATERIAL THICKNESS0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.231 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 172 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6009-24CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6009-24CC?
6009-24CC is a CLIP,SPRING TENSION.
What is the NSN for 6009-24CC?
6009-24CC is cataloged in the U.S. Government catalog under NSN 5340-00-754-2034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6009-24CC

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.