With the IB-5251 two 2.5" SATA HDD or an SSD and a 3.5" HDD can fit into your 5.25" bay. As the IB-5251 is a top-loader it even takes HDDs with a height of up to 15 mm. Easy Swap allow for fast and easy installation of the HDD.<br><br><b>Wolf in sheep's clothing?</b><br><br>...
Or vice versa? In any case this chic 2.5" to 3.5" HDD Converter looks like a 3.5" HDD with a fast 2,5" SSD inside. The converter can then be installed easily in a 3.5" bay.<br><br><b>All heights compatibile</b><br><br>Other than (for example) the internal 2.5" housing of your pc, this mobile rack can hold two 2.5" HDDs/SSDs with a height of 7 - 9.5 mm and one standard 3.5" HDD.<br><br><b>No tools required</b><br><br>The HDD/SSD can be installed or replaced quickly without tools. It needs no screws or screw driver to remove the disk, since the disk is straplessly accommodated in the enclosure.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5985-00-187-7815, indicating validated use in U.S. government and defense logistics supply chains.
| color | WHITE |
| material | COPPER ALLOY OVERALL |
| unit_type | UPRIGHT |
| body_style | ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE |
| case_style | SQUARE |
| flow_angle | 90.0 DEGREES |
| leg_length | 0.844 INCHES NOMINAL FIRST END IN |
| seal_width | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| seat_angle | 20.0 DEGREES FIRST END |
| conduit_type | FLEXIBLE METAL ASSEMBLY |
| power_rating | 2.0 WATTS AVERAGE AND 2.0 KILOWATTS PEAK |
| thread_class | 3A FIRST END A |
| NSN | 5985-00-187-7815 |
| PRECIOUS MATERIAL AND LOCATION | BODY SURFACES SILVER |
| FSC APPLICATION DATA | ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT |
| PRECIOUS MATERIAL | SILVER |
| MATERIAL | COPPER ALLOY BODY |
| VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE | +0.0 TO 4.5 GIGAHERTZ |
| MOUNTING METHOD | CONNECTOR |
| OVERALL DIAMETER | 0.600 INCHES NOMINAL IN |
| VOLTAGE STANDING WAVE RATIO | 1.25 |
| ATTENUATION ACCURACY REFERENCE FREQUENCY | 4.5 GIGAHERTZ |
| OUTPUT IMPEDANCE RATING IN OHMS | 50.0 |