PartsTable
Technical Data Sheet
Download PDF

6005-58C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6005-58C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.380 INCHES MAXIMUM IN, length: 0.200 INCHES NOMINAL IN, material: STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1085 OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.430 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-900-4626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6005-58C
NSN: 5340-00-900-4626
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.380 INCHES MAXIMUM IN
length0.200 INCHES NOMINAL IN
materialSTEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1085 OVERALL
hole_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
overall_height0.430 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.340 INCHES NOMINAL IN
distance_from_loop_center_to_end0.220 INCHES NOMINAL IN
material_document_and_classificationASTM A682 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5340-00-900-4626
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6005-58C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.200 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.340 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.220 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 0.380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.430 INCHES MAXIMUM IN
LENGTH0.200 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.340 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.220 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.380 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1085 OVERALL
HOLE DIAMETER0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
NAS1464Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6005-58C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6005-58C?
6005-58C is a CLIP,SPRING TENSION.
What parts can replace 6005-58C?
There is 1 known substitute for 6005-58C: NAS1464. Substitute compatibility should be verified for your specific system.
What is the NSN for 6005-58C?
6005-58C is cataloged in the U.S. Government catalog under NSN 5340-00-900-4626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6005-58C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.