PartsTable
Technical Data Sheet
Download PDF

6005-3A — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6005-3A: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.187 INCHES NOMINAL IN, length: 0.353 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.385 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-815-2500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6005-3A
NSN: 5340-00-815-2500
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.187 INCHES NOMINAL IN
length0.353 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.385 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.330 INCHES NOMINAL IN
specification/standard_data26512-GC842E3 MANUFACTURERS SPECIFICATION
distance_from_loop_center_to_end0.228 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-815-2500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6005-3A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.353 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.330 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 26512-GC842E3 MANUFACTURERS SPECIFICATION
•
DISTANCE FROM LOOP CENTER TO END: 0.228 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.385 INCHES NOMINAL IN
LENGTH0.353 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.330 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA26512-GC842E3 MANUFACTURERS SPECIFICATION
DISTANCE FROM LOOP CENTER TO END0.228 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.187 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
643636Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6005-3A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6005-3A?
6005-3A is a CLIP,SPRING TENSION.
What parts can replace 6005-3A?
There is 1 known substitute for 6005-3A: 643636. Substitute compatibility should be verified for your specific system.
What is the NSN for 6005-3A?
6005-3A is cataloged in the U.S. Government catalog under NSN 5340-00-815-2500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6005-3A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.