PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6005-01
6005-01 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The MIXER STAGE,FREQUENCY is a the manufacturer industrial component. Key specifications include material: ALUMINUM BODY, port_style: GASKET SEALGASKET SEAL, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.219 INCHES NOMINAL SINGLE ACTUATOR IN, temp_rating: 225.0 FAHRENHEIT225.0 FAHRENHEIT DEGF, shaft_length: 0.688 INCHES NOMINAL SINGLE ACTUATOR IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-179-5461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6005-01
NSN: 5365-00-179-5461
FSC: 5365
CAGE: 05147 — SMITH A O CORP ELECTRIC MOTORS DIV (USA)
SPECIFICATIONS
materialALUMINUM BODY
port_styleGASKET SEALGASKET SEAL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
temp_rating225.0 FAHRENHEIT225.0 FAHRENHEIT DEGF
shaft_length0.688 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
bore_diameter6.940 INCHES NOMINAL6.940 INCHES NOMINAL IN
hole_diameter0.182 INCHES NOMINAL IN
overall_width1.625 INCHES NOMINAL IN
pole_quantity3 SINGLE SECTION REAR
terminal_typeTAB, SOLDER LUG
NSN5365-00-179-5461
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MIXER STAGE,FREQUENCY TITLE COMPONENT PN 6005-01 MFR MIXER STAGE,FREQUENCY
KEY FEATURES
•
HOLE DIAMETER: 0.182 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR W/BOLT HOLES
•
MATERIAL: IRON
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.625 INCHES NOMINAL IN
HOLE DIAMETER0.182 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES
OVERALL WIDTH1.625 INCHES NOMINAL IN
MATERIALIRON
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
APERTURE DIAMETER1.266 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
600501Interchangeable
interchangeable cross-reference
interchangeable
140952-H1CInterchangeable
interchangeable cross-reference
interchangeable
MX200Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6005-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6005-01?
6005-01 is a MIXER STAGE,FREQUENCY.
What parts can replace 6005-01?
There are 3 known substitutes for 6005-01: 600501, 140952-H1C, MX200. Substitute compatibility should be verified for your specific system.
What is the NSN for 6005-01?
6005-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-179-5461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6005-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026