PartsTable
Technical Data Sheet

60042RSJ/C3/LH — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

60042RSJ/C3/LH: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7874 INCHES NOMINAL IN, overall_width: 0.4724 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-298-4469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60042RSJ/C3/LH
NSN: 3110-01-298-4469
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7874 INCHES NOMINAL IN
overall_width0.4724 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresPART OF THE ACTUATOR DRIVE ASSEMBLY OF THE C-5 ACFT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeLIPS TURNED OUTWARDLY
overall_outside_diameter1.6535 INCHES NOMINAL IN
internal_fit-up_contact_angular_directionPRIMARILY RADIAL
NSN3110-01-298-4469
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 60042RSJ/C3/LH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: LIPS TURNED OUTWARDLY
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.6535 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: PRIMARILY RADIAL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPELIPS TURNED OUTWARDLY
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.4724 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6535 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONPRIMARILY RADIAL
SPECIAL FEATURESPART OF THE ACTUATOR DRIVE ASSEMBLY OF THE C-5 ACFT
SEAL QUANTITY2
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
C5M30019Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 60042RSJ/C3/LH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60042RSJ/C3/LH?
60042RSJ/C3/LH is a BEARING,BALL,ANNULAR.
What parts can replace 60042RSJ/C3/LH?
There is 1 known substitute for 60042RSJ/C3/LH: C5M30019. Substitute compatibility should be verified for your specific system.
What is the NSN for 60042RSJ/C3/LH?
60042RSJ/C3/LH is cataloged in the U.S. Government catalog under NSN 3110-01-298-4469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60042RSJ/C3/LH