PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 600246A
600246A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK,CHAIN,S is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, inside_length: 1.6300 INCHES NOMINAL IN, style_designator: OPEN ENDS, material_diameter: 0.9300 INCHES NOMINAL IN, end_item_identification: CONSOLE GSE, lower_loop_inside_diameter: 0.1300 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-340-0480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
600246A
NSN: 5340-01-340-0480
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
inside_length1.6300 INCHES NOMINAL IN
style_designatorOPEN ENDS
material_diameter0.9300 INCHES NOMINAL IN
end_item_identificationCONSOLE GSE
lower_loop_inside_diameter0.1300 INCHES NOMINAL IN
upper_loop_inside_diameter0.5000 INCHES NOMINAL IN
NSN5340-01-340-0480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 600246A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
LOOP/HOLDING DIMENSION: 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
LENGTH: 0.425 INCHES NOMINAL IN
•
WIDTH: 0.400 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL HEIGHT1.000 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
LOOP/HOLDING DIMENSION0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
LENGTH0.425 INCHES NOMINAL IN
WIDTH0.400 INCHES NOMINAL IN
MATERIAL THICKNESS0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.278 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
501428Interchangeable
interchangeable cross-reference
interchangeable
0899Interchangeable
interchangeable cross-reference
interchangeable
00899Interchangeable
interchangeable cross-reference
interchangeable
600246AInterchangeable
interchangeable cross-reference
interchangeable
600246Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 600246A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 600246A?
600246A is a HOOK,CHAIN,S.
What parts can replace 600246A?
There are 5 known substitutes for 600246A: 501428, 0899, 00899 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 600246A?
600246A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-340-0480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 600246A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026