PartsTable
Technical Data Sheet

60023-1 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL,QUICK DISCONNECT is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, outside_diameter: 1.625 INCHES NOMINAL IN, aperture_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_height: 1.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-923-6434, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60023-1
NSN: 5330-00-923-6434
FSC: 5330
CAGE: 12599 — SAINT-GOBAIN PERFORMANCE PLASTICS CORPORATION DIV ENGINEERED POLYMERS (USA)
SPECIFICATIONS
materialRUBBER OVERALL
outside_diameter1.625 INCHES NOMINAL IN
special_featuresEXCHANGER AND MANIFOLD INSTALLA- TION-SECTION 58 HEAT,LEFT HAND,ICE ANDRAIN PROTECTION ONLY,ON THE BOEING COMPANY MODEL B-727 AIRCRAFT
aperture_diameter0.500 INCHES NOMINAL IN
cross-sectional_height1.188 INCHES NOMINAL IN
NSN5330-00-923-6434
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60023-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
OUTSIDE DIAMETER: 1.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 1.188 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALRUBBER OVERALL
SPECIAL FEATURESEXCHANGER AND MANIFOLD INSTALLA- TION-SECTION 58 HEAT,LEFT HAND,ICE ANDRAIN PROTECTION ONLY,ON THE BOEING COMPANY MODEL B-727 AIRCRAFT
OUTSIDE DIAMETER1.625 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT1.188 INCHES NOMINAL IN
APERTURE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
60023InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
61173InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8-08430InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
05008-0013InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
324-0672-000InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
B2A440-5C3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60023-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60023-1?
60023-1 is a TERMINAL,QUICK DISCONNECT.
What parts can replace 60023-1?
There are 13 known substitutes for 60023-1: 60023, 61173, 8-08430 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60023-1?
60023-1 is cataloged in the Federal Logistics Information System under NSN 5330-00-923-6434. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60023-1