PartsTable
Technical Data Sheet
PartsTable / MRO / 600118
600118 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, nut_style: HEXAGON, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.190 INCHES NOMINAL IN, nut_height: 0.187 INCHES NOMINAL IN, body_height: 0.300 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-696-8148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 600118
NSN: 5310-00-696-8148
FSC: 5310
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
nut_styleHEXAGON
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.190 INCHES NOMINAL IN
nut_height0.187 INCHES NOMINAL IN
body_height0.300 INCHES NOMINAL IN
body_length0.520 INCHES NOMINAL IN
temp_rating-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_shapeTRIANGULAR WITH HOLES SECOND END
thread_class3B
thread_seriesUNEF
exterior_colorBLACK
NSN5310-00-696-8148
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 600118 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES: UNEF
•
NOMINAL THREAD SIZE: 0.938 INCHES IN
•
BEARING SURFACE TYPE: WASHER FACED
•
NUT HEIGHT: 0.187 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD QUANTITY PER INCH20
SPECIAL FEATURESBOTH ENDS W/COUNTERSINK,15/16 IN.BY 30 DEG,TWO DRILLED HOLES ON OPPOSITE SIDE IN
THREAD SERIESUNEF
NOMINAL THREAD SIZE0.938 INCHES IN
BEARING SURFACE TYPEWASHER FACED
NUT HEIGHT0.187 INCHES NOMINAL IN
WIDTH ACROSS FLATS1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
8996668Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-5/1Interchangeable
interchangeable cross-reference
interchangeable
0140-0055Interchangeable
interchangeable cross-reference
interchangeable
600118Interchangeable
interchangeable cross-reference
interchangeable
30-011-8Interchangeable
interchangeable cross-reference
interchangeable
2HG224Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 600118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 600118?
600118 is a CAPACITOR,FIXED,MICA DIELECTRIC manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 600118?
There are 9 known substitutes for 600118: 8996668, MIL-C-5/1, 0140-0055 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 600118?
600118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-696-8148. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 600118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026