PartsTable
Technical Data Sheet
Download PDF

6001-93A — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6001-93A: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.562 INCHES NOMINAL IN, length: 0.407 INCHES NOMINAL IN, material: STEEL COMP 1075 OVERALL, hole_diameter: 0.093 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.461 INCHES NOMINAL IN, smallest_width: 0.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-413-4591, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6001-93A
NSN: 5340-00-413-4591
FSC: 5340 — Hardware, Commercial
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.562 INCHES NOMINAL IN
length0.407 INCHES NOMINAL IN
materialSTEEL COMP 1075 OVERALL
hole_diameter0.093 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.461 INCHES NOMINAL IN
smallest_width0.187 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
loop/holding_dimension0.375 INCHES NOMINAL IN
distance_from_loop_center_to_end0.230 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-413-4591
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6001-93A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.407 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
•
SMALLEST WIDTH: 0.187 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.230 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.461 INCHES NOMINAL IN
LENGTH0.407 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
SMALLEST WIDTH0.187 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.230 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.562 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
646551-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
64655-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 6001-93A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-93A?
6001-93A is a CLIP,SPRING TENSION.
What parts can replace 6001-93A?
There are 2 known substitutes for 6001-93A: 646551-1, 64655-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 6001-93A?
6001-93A is cataloged in the U.S. Government catalog under NSN 5340-00-413-4591. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6001-93A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.