PartsTable
Technical Data Sheet
Download PDF

6001-92C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6001-92C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, length: 0.450 INCHES MAXIMUM IN, hole_diameter: 0.103 INCHES NOMINAL IN, overall_height: 0.500 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.016 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-401-5087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6001-92C
NSN: 5340-00-401-5087
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length0.450 INCHES MAXIMUM IN
hole_diameter0.103 INCHES NOMINAL IN
overall_height0.500 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
specification/standard_data80205-NAS1464-80205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
distance_from_loop_center_to_end0.243 INCHES MINIMUM IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-401-5087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6001-92C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.450 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1464-80205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
DISTANCE FROM LOOP CENTER TO END: 0.243 INCHES MINIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.500 INCHES MAXIMUM IN
LENGTH0.450 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS1464-80205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM LOOP CENTER TO END0.243 INCHES MINIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH2.000 INCHES NOMINAL IN
HOLE DIAMETER0.103 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
NAS1464Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 6001-92C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-92C?
6001-92C is a CLIP,SPRING TENSION.
What parts can replace 6001-92C?
There is 1 known substitute for 6001-92C: NAS1464. Substitute compatibility should be verified for your specific system.
What is the NSN for 6001-92C?
6001-92C is cataloged in the U.S. Government catalog under NSN 5340-00-401-5087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6001-92C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.