PartsTable
Technical Data Sheet
Download PDF

6001-51C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6001-51C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, length: 0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.447 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-593-3070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6001-51C
NSN: 5340-00-593-3070
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
length0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.447 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentSILVER OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
loop/holding_dimension0.370 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.253 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-593-3070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6001-51C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.370 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.253 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.447 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN
LENGTH0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.370 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.253 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
WIDTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
076-005330Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6001-51C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-51C?
6001-51C is a CLIP,SPRING TENSION.
What parts can replace 6001-51C?
There is 1 known substitute for 6001-51C: 076-005330. Substitute compatibility should be verified for your specific system.
What is the NSN for 6001-51C?
6001-51C is cataloged in the U.S. Government catalog under NSN 5340-00-593-3070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6001-51C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.