PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6001-10C
6001-10C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.410 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.103 INCHES NOMINAL IN, overall_height: 0.460 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-964-8612, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6001-10C
NSN: 5340-00-964-8612
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length0.410 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.103 INCHES NOMINAL IN
overall_height0.460 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.250 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-964-8612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6001-10C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
WIDTH: 0.750 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
WIDTH0.750 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
OVERALL HEIGHT0.460 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HOLE DIAMETER0.103 INCHES NOMINAL IN
LENGTH0.410 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1185-06CNX207Interchangeable
interchangeable cross-reference
interchangeable
69991-06-7CInterchangeable
interchangeable cross-reference
interchangeable
58A5A120-7Interchangeable
interchangeable cross-reference
interchangeable
2554843-7Interchangeable
Same NIIN cross-reference
interchangeable
6010-10CNInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6001-10C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-10C?
6001-10C is a CLIP,SPRING TENSION.
What parts can replace 6001-10C?
There are 5 known substitutes for 6001-10C: 1185-06CNX207, 69991-06-7C, 58A5A120-7 and 2 more. Substitute compatibility should be verified for your specific system.
Is 6001-10C still available?
6001-10C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6001-10C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026