PartsTable
Technical Data Sheet
Download PDF

6000836 — GROMMET,AIRCRAFT,MA

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

6000836: GROMMET,AIRCRAFT,MA.

The GROMMET,AIRCRAFT,MA is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.7500 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.6931 INCHES MINIMUM AND 0.7131 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-0882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6000836
NSN: 3110-00-198-0882
NIINs: 001980882, 015622584
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.7500 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MAXIMUM
overall_width0.6931 INCHES MINIMUM AND 0.7131 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishUNGROUND
special_featuresBANDED OD
style_designatorRADIAL-THRUST, L-SHAPED OUTER RING WITH BAND, CHANNEL-SHAPED INNER RING UNDERHUNG ON BOTH SIDES, THREE-POINT CONTACT
overall_outside_diameter3.0575 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-198-0882
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6000836 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: UNGROUND
•
STYLE DESIGNATOR: RADIAL-THRUST, L-SHAPED OUTER RING WITH BAND, CHANNEL-SHAPED INNER RING UNDERHUNG ON BOTH SIDES, THREE-POINT CONTACT
•
OVERALL OUTSIDE DIAMETER: 3.0575 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHUNGROUND
STYLE DESIGNATORRADIAL-THRUST, L-SHAPED OUTER RING WITH BAND, CHANNEL-SHAPED INNER RING UNDERHUNG ON BOTH SIDES, THREE-POINT CONTACT
OVERALL WIDTH0.6931 INCHES MINIMUM AND 0.7131 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.0575 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
SPECIAL FEATURESBANDED OD
BORE DIAMETER1.7500 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
521Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 6000836?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6000836?
6000836 is a GROMMET,AIRCRAFT,MA.
What parts can replace 6000836?
There is 1 known substitute for 6000836: 521. Substitute compatibility should be verified for your specific system.
What is the NSN for 6000836?
6000836 is cataloged in the U.S. Government catalog under NSN 3110-00-198-0882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6000836