PartsTable
Technical Data Sheet
Download PDF

6000553 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6000553: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.270 INCHES NOMINAL IN, overall_height: 0.720 INCHES NOMINAL IN, prong_quantity: 10, style_designator: STANDARD, surface_treatment: PAINT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-460-2409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6000553
NSN: 5340-00-460-2409
FSC: 5340 — Hardware, Commercial
CAGE: 77915 — SHELLER-GLOBE CORP PORTLAND DIV (USA)
SPECIFICATIONS
materialSTEEL
head_height0.270 INCHES NOMINAL IN
overall_height0.720 INCHES NOMINAL IN
prong_quantity10
style_designatorSTANDARD
surface_treatmentPAINT
head_outside_diameter3.310 INCHES NOMINAL IN
prong_outside_diameter3.060 INCHES NOMINAL IN
hole_accommodation_diameter2.938 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
material_accommodated_thickness0.188 INCHES NOMINAL IN
NSN5340-00-460-2409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6000553 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.270 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 2.938 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 3.060 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT
•
HEAD OUTSIDE DIAMETER: 3.310 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.720 INCHES NOMINAL IN
HEAD HEIGHT0.270 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER2.938 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
MATERIAL ACCOMMODATED THICKNESS0.188 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER3.060 INCHES NOMINAL IN
SURFACE TREATMENTPAINT
HEAD OUTSIDE DIAMETER3.310 INCHES NOMINAL IN
MATERIALSTEEL
PRONG QUANTITY10
SUBSTITUTES & CROSS-REFERENCES 5
P67764Reference document
Same NSN cross-reference
Reference document — Secondary reference
LT2-608Reference document
Same NSN cross-reference
Reference document — Secondary reference
11210Reference document
Same NSN cross-reference
Reference document — Secondary reference
L18519Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
13212E4238Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6000553?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6000553?
6000553 is a BUTTON,PLUG.
What parts can replace 6000553?
There are 5 known substitutes for 6000553: P67764, LT2-608, 11210 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6000553?
6000553 is cataloged in the U.S. Government catalog under NSN 5340-00-460-2409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6000553

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.