PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 600-701-9/16
600-701-9/16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 600-701-9/16 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-4277, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
600-701-9/16
NSN: 5330-00-641-4277
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
Part Number600-701-9/16
NSN5330-00-641-4277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 600-701-9/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR PACKING
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
•
PACKING INSIDE DIAMETER: 0.542 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
PACKING RING THICKNESS: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR PACKING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
PACKING INSIDE DIAMETER0.542 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
PACKING RING THICKNESS0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR CADMIUM OR CHROMATE OR CADMIUM AND PHOSPHATE RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS51963-107Interchangeable
interchangeable cross-reference
interchangeable
28279Interchangeable
interchangeable cross-reference
interchangeable
91105947Interchangeable
interchangeable cross-reference
interchangeable
2-1378Interchangeable
interchangeable cross-reference
interchangeable
9540PL0901158Interchangeable
interchangeable cross-reference
interchangeable
K10A16T3511Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 600-701-9/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 600-701-9/16?
600-701-9/16 is a 600-701-9/16.
What parts can replace 600-701-9/16?
There are 10 known substitutes for 600-701-9/16: MS51963-107, 28279, 91105947 and 7 more. Substitute compatibility should be verified for your specific system.
Is 600-701-9/16 still available?
600-701-9/16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 600-701-9/16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026