PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 600-0000-1/2
600-0000-1/2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 600-0000-1/2 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-601-4932, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
600-0000-1/2
NSN: 5330-00-601-4932
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
Part Number600-0000-1/2
NSN5330-00-601-4932
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 600-0000-1/2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.050 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
SURFACE TREATMENT: CADMIUM RETAINER
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.072 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.492 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR PACKING
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855 CL 1,CL 2 OR CL 3 MIL SPEC ALL MATERIAL RESPONSES PACKING
•
OUTSIDE DIAMETER: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.050 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
SURFACE TREATMENTCADMIUM RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.072 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.492 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR PACKING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855 CL 1,CL 2 OR CL 3 MIL SPEC ALL MATERIAL RESPONSES PACKING
OUTSIDE DIAMETER0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
600-001-1/2Interchangeable
interchangeable cross-reference
interchangeable
07-006Interchangeable
interchangeable cross-reference
interchangeable
6212Interchangeable
interchangeable cross-reference
interchangeable
6640NCM050530Interchangeable
interchangeable cross-reference
interchangeable
4045611490Interchangeable
Same NIIN cross-reference
interchangeable
7324392Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 600-0000-1/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 600-0000-1/2?
600-0000-1/2 is a 600-0000-1/2.
What parts can replace 600-0000-1/2?
There are 8 known substitutes for 600-0000-1/2: 600-001-1/2, 07-006, 6212 and 5 more. Substitute compatibility should be verified for your specific system.
Is 600-0000-1/2 still available?
600-0000-1/2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 600-0000-1/2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026