PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-S-88
60-S-88 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAINER is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.219 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 1.250 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.375 INCHES NOMINAL IN, pole_quantity: 1 EACH SECTION REAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-254-4639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-S-88
NSN: 5340-00-254-4639
FSC: 5340
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length1.250 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width1.375 INCHES NOMINAL IN
pole_quantity1 EACH SECTION REAR
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height1.531 INCHES NOMINAL IN
overall_length2.687 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity8 EACH SECTION REAR
NSN5340-00-254-4639
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-S-88 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
11944Interchangeable
interchangeable cross-reference
interchangeable
43924Interchangeable
interchangeable cross-reference
interchangeable
D89368Interchangeable
interchangeable cross-reference
interchangeable
5520Interchangeable
interchangeable cross-reference
interchangeable
60-S-88Interchangeable
interchangeable cross-reference
interchangeable
200099Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-S-88?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-S-88?
60-S-88 is a STRAINER.
What parts can replace 60-S-88?
There are 14 known substitutes for 60-S-88: 11944, 43924, D89368 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-S-88?
60-S-88 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-254-4639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-S-88

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026