60-P-31-365 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

60-P-31-365: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, special_features: HARDNESS RATING IS 65.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 7.345 INCHES MINIMUM AND 7.445 INCHES MAXIMUM IN, center_hole_diameter: 6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-467-0195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

60-P-31-365

NSN: 5331-00-467-0195
FSC: 5331 — O-ring
CAGE: 28486 — WEST AMERICAN RUBBER CO EXTRUDE PRODUCTS DIV (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
special_features	HARDNESS RATING IS 65.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter	7.345 INCHES MINIMUM AND 7.445 INCHES MAXIMUM IN
center_hole_diameter	6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
cross-sectional_height	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN	5331-00-467-0195

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

PERIPHERAL DIAMETER: 7.345 INCHES MINIMUM AND 7.445 INCHES MAXIMUM IN

•

CENTER HOLE DIAMETER: 6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
PERIPHERAL DIAMETER	7.345 INCHES MINIMUM AND 7.445 INCHES MAXIMUM IN
SPECIAL FEATURES	HARDNESS RATING IS 65.0 SHORE DUROMETER A NOMINAL OVERALL
CENTER HOLE DIAMETER	6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 9

MS9021-365Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

PRP568-365-457-60Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

411187-365Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

7866-365Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PX1775-365Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SR-822A-60-365Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 60-P-31-365?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 60-P-31-365?

60-P-31-365 is a O-RING.

What parts can replace 60-P-31-365?

There are 9 known substitutes for 60-P-31-365: MS9021-365, PRP568-365-457-60, 411187-365 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 60-P-31-365?

60-P-31-365 is cataloged in the U.S. Government catalog under NSN 5331-00-467-0195. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

60-P-31-365 — O-RING

Request a Quote — 60-P-31-365