PartsTable
Technical Data Sheet
Download PDF

60-P-31-030 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

60-P-31-030: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.610 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN, center_hole_diameter: 1.479 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-054-0168, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-P-31-030
NSN: 5331-00-054-0168
FSC: 5331 — O-ring
CAGE: 28486 — WEST AMERICAN RUBBER CO EXTRUDE PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.610 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
center_hole_diameter1.479 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-054-0168
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-P-31-030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.610 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.479 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.610 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.479 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
PZ-1775-029Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-029 N602-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP-568-029-457-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1793-029Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7866-029Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M29513-29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 60-P-31-030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-P-31-030?
60-P-31-030 is a O-RING.
What parts can replace 60-P-31-030?
There are 10 known substitutes for 60-P-31-030: PZ-1775-029, 2-029 N602-70, PRP-568-029-457-60 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-P-31-030?
60-P-31-030 is cataloged in the U.S. Government catalog under NSN 5331-00-054-0168. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-P-31-030