60-HM4-6-316 — NIPPLE,TUBE

✓ Government record, cited

— · HOSE FITTING

PRODUCT OVERVIEW

60-HM4-6-316: NIPPLE,TUBE.

The NIPPLE,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, seat_angle: 59.0 DEGREES ALL ENDS, thread_class: 2A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS, special_features: OD 0.250, ID 0.083; THREADS ARE LEFT HAND; CAGE 2J641 CALLS THIS A NIPPLE, SS, DH500, 2.75 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 4730-01-499-3724, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

60-HM4-6-316

NSN: 4730-01-499-3724
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 07097 — GRACO HIGH PRESSURE EQUIPMENT INC. DBA HIGH PRESSURE EQUIPMENT COMPANY (USA)

SPECIFICATIONS

material	STEEL COMP 316 OVERALL
seat_angle	59.0 DEGREES ALL ENDS
thread_class	2A ALL ENDS A
connection_type	THREADED EXTERNAL TUBE ALL ENDS
connection_style	FLARED (TUBE) ALL ENDS
special_features	OD 0.250, ID 0.083; THREADS ARE LEFT HAND; CAGE 2J641 CALLS THIS A NIPPLE, SS, DH500, 2.75 IN. IN
style_designator	FLARED W/ OUT WRENCHING FACILITY
operating_pressure	60000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size	0.250 INCHES ALL ENDS IN
nominal_overall_length	6.000 INCHES IN
end_item_identification	PMEL CALIBRATION EQUIPMENT
thread_quantity_per_inch	28 ALL ENDS
NSN	4730-01-499-3724

COMPONENT DIAGRAM

KEY FEATURES

•

CONNECTION STYLE: FLARED (TUBE) ALL ENDS

•

NOMINAL OVERALL LENGTH: 6.000 INCHES IN

•

CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS

•

STYLE DESIGNATOR: FLARED W/ OUT WRENCHING FACILITY

•

NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.250 INCHES ALL ENDS IN

•

OPERATING PRESSURE: 60000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS

•

NOMINAL THREAD SIZE: 0.250 INCHES ALL ENDS IN

•

SEAT ANGLE: 59.0 DEGREES ALL ENDS

TECHNICAL CHARACTERISTICS

CONNECTION STYLE	FLARED (TUBE) ALL ENDS
NOMINAL OVERALL LENGTH	6.000 INCHES IN
CONNECTION TYPE	THREADED EXTERNAL TUBE ALL ENDS
STYLE DESIGNATOR	FLARED W/ OUT WRENCHING FACILITY
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED	0.250 INCHES ALL ENDS IN
OPERATING PRESSURE	60000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL THREAD SIZE	0.250 INCHES ALL ENDS IN
SEAT ANGLE	59.0 DEGREES ALL ENDS
SPECIAL FEATURES	OD 0.250, ID 0.083; THREADS ARE LEFT HAND; CAGE 2J641 CALLS THIS A NIPPLE, SS, DH500, 2.75 IN. IN
PART NAME ASSIGNED BY CONTROLLING AGENCY	CONED AND THREADED NIPPLE

SUBSTITUTES & CROSS-REFERENCES 2

100208Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

60-HM4-6Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 60-HM4-6-316?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 60-HM4-6-316?

60-HM4-6-316 is a NIPPLE,TUBE.

What parts can replace 60-HM4-6-316?

There are 2 known substitutes for 60-HM4-6-316: 100208, 60-HM4-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 60-HM4-6-316?

60-HM4-6-316 is cataloged in the U.S. Government catalog under NSN 4730-01-499-3724. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

60-HM4-6-316 — NIPPLE,TUBE

Request a Quote — 60-HM4-6-316