PartsTable
Technical Data Sheet
60-9-30 ✓ Verified by PartsTable
Cellularline · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

A smartphone case with pockets and card holder in a single accessory. Elegant and practical, Book Agenda is a book-style case with a faux leather finish. It’s a great way to optimise the space in your bag or pocket.

The practical stand offers easy viewing of video and other contents when you are on the go. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1935, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
60-9-30
NSN: 5306-00-151-1935
FSC: 5306
CAGE: 99238 — AIR FORCE STANDARD
SPECIFICATIONS
end_item_identificationHELICOPTER,CARGO; CH-47 SERIES
reference_number_differentiating_characteristicsAS DIFFERENTIATED BY SOURCE CONTROL DWG 145HS552-1
NSN5306-00-151-1935
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 60-9-30 · Cellularline ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
WIDTH BETWEEN FLATS: 0.875 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 1 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR AN-P-32 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD QUANTITY PER INCH: 18
MINIMUM TENSILE STRENGTH: 10000 POUNDS PER SQUARE INCH LBS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.500 INCHES MINIMUM IN
HEAD HEIGHT: 0.365 INCHES NOMINAL IN
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.875 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 1 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR AN-P-32 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD QUANTITY PER INCH18
MINIMUM TENSILE STRENGTH10000 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.500 INCHES MINIMUM IN
HEAD HEIGHT0.365 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
FFB571ATYPEB2CLASSCInterchangeable
interchangeable cross-reference
interchangeable
60-9-20Interchangeable
interchangeable cross-reference
interchangeable
60-9-24Interchangeable
interchangeable cross-reference
interchangeable
60-9-26Interchangeable
interchangeable cross-reference
interchangeable
60-9-36Interchangeable
interchangeable cross-reference
interchangeable
60930Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-9-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-9-30?
60-9-30 is a VALVE,ENGINE AND AUXILIARY POWER manufactured by Cellularline.
What parts can replace 60-9-30?
There are 9 known substitutes for 60-9-30: FFB571ATYPEB2CLASSC, 60-9-20, 60-9-24 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-9-30?
60-9-30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-9-30