60-894: CAPACITOR,FIXED,CERAMIC DIELECTR.
A USB 3.2 (Gen 2) enclosure for 2.5" SATA SSDs and HDDs with a height of up to 9.5 mm can be installed here safely and completely without tools. The additional silicone cover protects against damage in the event of a fall. The installed storage is therefore ideally protected and can travel safely in your luggage.
The USB Type-C connection ensures transfer rates of up to 10 Gbit/s and thus super fast data exchange. At the same time, the case is backwards compatible with USB 3.0 and USB 2.0. 100% toolless The IB-246-C31-G is an aluminium enclosure into which a 2.5" SATA hard disk can be installed.
No tools at all are needed to install the SSD, which makes it quick and easy to do anywhere. SSDs or HDDs with a height of up to 9.5 mm can be installed. Well protected A silicone sleeve can optionally be placed around the enclosure.
This not only provides a non-slip grip, but also protects the installed hard drive from possible damage in the event of a fall. T This part is cataloged in the U.S. Government catalog under NSN 9540-00-148-4364, indicating validated use in U.S.
government and defense logistics supply chains.
| length | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT |
| material | RUBBER SYNTHETIC SEALING ELEMENT |
| case_style | SQUARE |
| seal_width | 0.469 INCHES NOMINAL IN |
| leg_thickness | 0.125 INCHES NOMINAL IN |
| heat_treatment | T-3511 SOLUTION HEAT TREATED |
| overall_height | 1.500 INCHES NOMINAL IN |
| first_tip_style | SQUARE END |
| top_flange_width | 2.000 INCHES NOMINAL IN |
| basic_shape_style | T SHAPE |
| housing_bore_diameter | 3.350 INCHES NOMINAL IN |
| left_top_inside_angle | 90.0 DEGREES NOMINAL |
| NSN | 9540-00-148-4364 |
| OVERALL HEIGHT | 1.500 INCHES NOMINAL IN |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL IN |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.000 INCHES NOMINAL IN |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.156 INCHES NOMINAL IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.156 INCHES NOMINAL IN |