PartsTable
Technical Data Sheet
Download PDF

60-71431REVAPC13 — PLUG,FUSIBLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

60-71431REVAPC13: PLUG,FUSIBLE.

The PLUG,FUSIBLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASING, core_diameter: 0.625 INCHES NOMINAL IN, usage_location: OUTSIDE, size_designation: 1 INCH IN, features_provided: CORE, operating_pressure: 70.0 KILOGRAMS PER SQUARE CENTIMETER MAXIMUM KG. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-586-3965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-71431REVAPC13
NSN: 5340-00-586-3965
FSC: 5340 — Hardware, Commercial
CAGE: 19857 — THE ELECTRIC HEATER CO DBA HUBBELL ELECTRIC HEATER CO. (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASING
core_diameter0.625 INCHES NOMINAL IN
usage_locationOUTSIDE
size_designation1 INCH IN
features_providedCORE
operating_pressure70.0 KILOGRAMS PER SQUARE CENTIMETER MAXIMUM KG
standard_designatorAMERICAN STANDARDS ASSOCIATION
core_fusing_temp_rating180.0 DEG FAHRENHEIT
material_document_and_classificationMIL-B-895 MIL SPEC SINGLE MATERIAL RESPONSE CASING
thread_size_and_series/type_designator1-11 1/2 NPT
NSN5340-00-586-3965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-71431REVAPC13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-895 MIL SPEC SINGLE MATERIAL RESPONSE CASING
•
OPERATING PRESSURE: 70.0 KILOGRAMS PER SQUARE CENTIMETER MAXIMUM KG
•
STANDARD DESIGNATOR: AMERICAN STANDARDS ASSOCIATION
•
CORE DIAMETER: 0.625 INCHES NOMINAL IN
•
FEATURES PROVIDED: CORE
•
SIZE DESIGNATION: 1 INCH IN
•
CORE FUSING TEMP RATING: 180.0 DEG FAHRENHEIT
•
MATERIAL: COPPER ALLOY CASING
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-895 MIL SPEC SINGLE MATERIAL RESPONSE CASING
OPERATING PRESSURE70.0 KILOGRAMS PER SQUARE CENTIMETER MAXIMUM KG
STANDARD DESIGNATORAMERICAN STANDARDS ASSOCIATION
CORE DIAMETER0.625 INCHES NOMINAL IN
FEATURES PROVIDEDCORE
SIZE DESIGNATION1 INCH IN
CORE FUSING TEMP RATING180.0 DEG FAHRENHEIT
MATERIALCOPPER ALLOY CASING
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-11 1/2 NPT
USAGE LOCATIONOUTSIDE
SUBSTITUTES & CROSS-REFERENCES 3
99BReference document
Same NSN cross-reference
Reference document — Secondary reference
49MC1133N38PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
507438REVAPC86Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 60-71431REVAPC13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-71431REVAPC13?
60-71431REVAPC13 is a PLUG,FUSIBLE.
What parts can replace 60-71431REVAPC13?
There are 3 known substitutes for 60-71431REVAPC13: 99B, 49MC1133N38PC8, 507438REVAPC86. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-71431REVAPC13?
60-71431REVAPC13 is cataloged in the U.S. Government catalog under NSN 5340-00-586-3965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-71431REVAPC13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.