PartsTable
Technical Data Sheet
Download PDF

60-574-0019-28 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

60-574-0019-28: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.859 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, fastener_length: 0.970 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-082-0125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-574-0019-28
NSN: 5305-01-082-0125
FSC: 5305 — Screws
CAGE: 52374 — FLOWSERVE CORP DBA AUTOMAX ACTUATORS DIV FLOWSERVE US COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class3A A
thread_length0.859 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
fastener_length0.970 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_document_and_classificationMIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5305-01-082-0125
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 60-574-0019-28 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.859 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
FASTENER LENGTH0.970 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
THREAD LENGTH0.859 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16782 (CANCELLED) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD CLASS3A A
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
E-74114PC71Reference document
Same NSN cross-reference
Reference document — Secondary reference
HB-1-5/16-18X16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 60-574-0019-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-574-0019-28?
60-574-0019-28 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 60-574-0019-28?
There are 2 known substitutes for 60-574-0019-28: E-74114PC71, HB-1-5/16-18X16. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-574-0019-28?
60-574-0019-28 is cataloged in the U.S. Government catalog under NSN 5305-01-082-0125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-574-0019-28

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.